Specifications

Features in 291-11 55
Version 291-18
C613-10488-00 REV Q
Level 3
CR Module Level Description
AR400 AR7x5 AR7x0S Rapier i Rapier w AT-8800 AT-8600 AT-8700XL x900-48 AT- 9900 AT-9800
CR00007089 PRI 3 The following issues occurred with testing PRI interfaces:
■ When the commands enable pri=x test=y and disable pri=x test=y
were entered, the router or switch did not display an “Operation
Successful” message.
This issue has been resolved.
■ The output displayed by the “?” help for enable pri=x test=?
incorrectly said that the maximum value was 11.
This issue has been resolved. The “?” help now returns the following
message:
required - decimal in the range 1 to 7 (for E1)
1 to 9 (for T1)
■ When show pri=x test was entered, the router or switch displayed an
error message instead of the table of test switches.
This issue has been resolved.
■ When disable pri=x test was entered with no value on the test
parameter, the router or switch displayed an error message instead of
disabling all current tests.
This issue has been resolved.
YYYYY––––––
CR00007499 VRRP 3 Previously, if a VRRP virtual router was enabled but not connected to
anything (for example, no ports in the VRRP VLAN were connected), and
the VR was disabled by using the command disable vrrp=n, the error
message “Error (3088271): VR n is already disabled” was displayed.
This issue has been resolved. This incorrect error message no longer
displays.
YYYYYYYYYYY