Specifications

Features in 291-11 54
Version 291-18
C613-10488-00 REV Q
CR00018941 IP Gateway 2 When deleting an IP RIP interface or disabling an IP interface with RIP
running on it, the router or switch would stop responding and reboot after
5 minutes.
This issue has been resolved.
YYYYYYYYYYY
CR00018943 Switch 2 With 1000Base SFPs installed, the AR770S Eth ports failed to establish a link
on restarting when receiving a moderate amount of traffic.
This issue has been resolved.
––Y––––––––
CR00019273 BGP 2 Once a BGP peer had received updates from another peer, it was not
possible to use the commands delete bgp net or delete bgp import to
remove a locally-imported route from the BGP RIB.
This issue has been resolved. These commands will now work at all times.
YYYYYY––YYY
CR00019351 TPAD, X25T 2 Multiple concurrent TPAD transactions could cause the router or switch to
reboot.
This issue has been resolved.
YYYYY––––––
CR00019542 Eth 2 With some link partners, an AR415S Ethernet port would stop receiving
packets after some hours or days, and a link state cycle or interface reset
was required to restore operation.
This issue has been resolved.
Y––––––––––
CR00019713 OSPF 2 If two or more ECMP routes from Type-5 LSAs were learned by the router
or switch, only the route from the LSA with the highest Router ID would be
inserted into the IP route table.
This issue has been resolved. All routes will now be inserted.
YYYYYYYYYYY
CR Module Level Description
AR400 AR7x5 AR7x0S Rapier i Rapier w AT-8800 AT-8600 AT-8700XL x900-48 AT- 9900 AT-9800