Specifications

Features in 291-14 37
Version 291-18
C613-10488-00 REV Q
Level 3
Level 4
No level 4 issues.
Enhancements
No enhancements.
CR Module Level Description
AR44x / AR450 AR7x5 AR750S / AR770S Rapier i Rapier w AT-8800 AT-8600 AT-8700XL AT-8948 / x900-48 AT-9900 AT-9800
CR00015046 L2TP 3 When the L2TP speed was changed, output of the command show ppp
util still showed the old speed.
This issue has been resolved. The previous behaviour was not incorrect,
because the new speed only takes effect when the L2TP tunnel is restarted
by deactivating and reactivating the call. The router or switch now displays
a message to indicate this.
Y Y YYYY––YYY
CR00019267 Hotswapping 3 Occasionally, AT-8948 and x900-48 series switches rebooted or gave an
invalid error message when hotswapping a PSU or FOM unit in. The invalid
error message was about an airflow direction mismatch. The PSU or FOM
would function correctly, but the switch would display incorrect
information in output of the show system command.
This issue has been resolved so that the switch does not reboot. If the error
occurs, the switch displays a console message to indicate that a failure
occurred when hotswapping in, and a log message will record the failure.
If there was a failure when hotswapping the PSU or FOM in, the switch will
display a console message when the PSU or FOM is swapped out.
– – ––––––Y––
CR00020168 L2TP 3 If the router or switch attempted to establish an L2TP tunnel over a link that
was down, multiple tunnels were created when the link was re-established.
This issue has been resolved.
Y Y YYYY––YYY