Specifications

Features in 291-16 23
Version 291-18
C613-10488-00 REV Q
Enhancements
CR Module Level Description
AR44x / AR450 AR7x5 AR750S / AR770S Rapier i Rapier w AT-8800 AT-8600 AT-8700XL AT-8948 / x900-48 AT-9900 AT-9800
CR00019706 PPP - A new parameter ipborrow has been added to the create and set ppp
interface commands. You can set the ipborrow parameter to the values:
yes|on|true|no|off|false.
This parameter is required in the following situation: the PPP interface has
been configured as an unnumbered IP interface (i.e. configured with IP
address 0.0.0.0), but you do not want the PPP peer to allocate an IP address
to be used on the local PPP interface (i.e. iprequest=no). In this case, the
router or switch needs to present a non-zero IP address to the peer during
IPCP negotiation. The solution to this problem is to use another IP address
that has been configured on the router or switch (invariably another
interface on the device will have been configured with a non-zero IP
address). With the ipborrow parameter, you can configure the
unnumbered PPP interface to 'borrow' this other interface's IP address to
use as the IP address it presents to the peer during IPCP negotiation.
If there are multiple non-zero IP interfaces on the router or switch, you
cannot specify which interface's IP address the unnumbered PPP will
borrow; it will simply borrow the IP address from the interface with the
lowest ifindex.
YYYYYY––YYY
CR00021106 IPsec, ISAKMP - You can now specify peers in ISAKMP and IPsec policies using a DNS name.
Previously, you could only specify the peers using an IP address.
YYYY–Y–––––