Specifications

Features in 291-04 136
Version 291-18
C613-10488-00 REV Q
CR00014328 IP Gateway,
Switch
3 If a port had static ARP entries defined for a VLAN, then adding the port to
another VLAN made those static ARP entries inactive.
Also, deleting a port from a VLAN would delete all static ARP entries that were
defined on that port, including entries for other VLANs. Note that this deletion
issue did not occur on Rapier i, AT-8800, AT-8700XL, or AT-8600 Series switches.
Both of these issues have been resolved.
Y–YYYYYYYY
CR00014652 PIM6 3 If a user changes the PIMv6 BSR candidate priority to the same value as the
currently-elected BSR’s priority, then the router or switch should be elected as the
BSR if its IPv6 address is higher than the currently-elected BSR. This did not
happen.
This issue has been resolved.
YYYYY––YYY
CR00014659 DHCP 3 On the DHCP server, a user could create two static DHCP entries for the same
client in one range. This was only possible if the client had first obtained a
dynamic address from the server.
This issue has been resolved. It is now impossible to add the same static client
twice, even when that client has a pre-existing dynamic entry.
YYYYYYYYYY
CR00014724 IGMP
Snooping
3 When the router or switch received an IGMP Leave message, it did not update
IGMP Snooping counters correctly in some circumstances.
This issue has been resolved.
Y–YYYYYYYY
CR00014746 WANLB,
IP Gateway
3 It was possible to delete an IP interface that was configured as a WAN load
balancer resource.
This issue has been resolved.
YY––––––––
CR Module Level Description
AR400 AR7x5 AR7x0S Rapier i AT-8800 AT-8600 AT-8700XL x900-48 AT- 9900 AT-9800