Specifications

Features in 291-04 131
Version 291-18
C613-10488-00 REV Q
Level 3
CR Module Level Description
AR400 AR7x5 AR7x0S Rapier i AT-8800 AT-8600 AT-8700XL x900-48 AT- 9900 AT-9800
CR00007000 GUI, IGMP 3 The graphical user interface (GUI) listed an invalid local interface in the Interface
drop-down list on the page for adding a static IGMP association.
This issue has been resolved.
YYYYYYY–YY
CR00009274 Switch
IP Gateway
3 If many VLANs simultaneously went from up to down, or down to up, the switch
became unresponsive for a period of time.
This issue has been improved by reducing the processing overhead for VLAN state
changes.
–––––––YY–
CR00009302 Switch 3 The number of filters that can be created on an AT-8848 switch is limited by the
number of filter matches available. Previously, if a user attempted to create a
filter, and an existing filter already used the same filter match as the new filter,
the switch counted this as two matches being used. This reduced the number of
available filters.
This issue has been resolved.
––––Y–––––
CR00009478 BGP 3 When a peer’s inroutemap filter assigned an incoming route to a well-known
BGP community, the router or switch did not use the community’s restricted
advertisement settings, such as NoExport or NoAdvertise.
This issue has been resolved.
Also, output of the command show bgp peer now shows whether a route has
been assigned to a community. This is indicated by a flag “m”, as shown in bold
in the following route entry example:
> 192.2.2.0/24 192.168.1.2 IGP - 100
m SEQ 1;
The flag “m” indicates that this route has at least one community attached to it.
YYYYY––YYY