Specifications

Features in 291-17 12
Version 291-18
C613-10488-00 REV Q
CR00023040 GUI,
Firewall
3 When configuring LAN to WAN Firewall rules via the GUI, the “Action”
drop-down box was missing the “No NAT" option.
This issue has been resolved.
YYYY–Y––––Y
CR00023083 IPsec 3 Previously, if the router or switch had IPsec policies create on multiple
interfaces, it would sometimes fail to create a connection when it received
a connection request from a valid peer. This was because the router or
switch would sometimes use the wrong IPsec policy for the interface.
This issue has been resolved.
YYYYYY––– ––
CR00023393 PPP 3 If the router or switch was acting as a PPPoE Access Concentrator, and it
was power-cycled or restarted, then re-establishing any existing PPPoE
sessions could take longer than necessary. This was because the router or
switch would send the incorrect PADT in response to PPPoE session packets
sent from the existing PPPoE session (EtherType of 0x8664, the PPPoE
Session Protocol). Some PPPoE clients would ignore this PADT, causing a
delay before the PPPoE session was re-established.
This issue has been resolved. The router or switch now send the correct
PADT in response to any existing sessions after restarting (EtherType of
0x8663, the PPPoE Discovery Protocol).
YYYYYY––YYY
CR Module Level Description
AR44x / AR450 AR7x5 AR750S / AR770S Rapier i Rapier w AT-8800 AT-8600 AT-8700XL AT-8948 / x900-48 AT-9900 AT-9800