Installation guide

BlackDiamond 8000 Series Modules
BlackDiamond 8800 Series Switches Hardware Installation Guide
52
NOTE
Tabl e 11 describes port LED activity for the G48Tc, G48Te2, 8500-G48T-e, and 8900-G48T-xl modules without an
installed S-POE card. When these modules have an S-POE card installed, the port LEDs operate as described in
Tabl e 12 .
Port LEDs on PoE Modules (G48P, G48Pe, and G48Tc, G48Te2, or 8500-G48T-e or
8900-G48T-xl with S-POE Card)
This section describes the port LEDs for BlackDiamond 8000 series I/O modules that support PoE.
These include the following modules:
● G48P I/O module
● G48Pe I/O module
● G48Tc I/O module with an installed S-POE card
● G48Te2 I/O module with an installed S-POE card
● 8500-G48T-e I/O module with an installed S-POE card
● 8900-G48T-xl I/O module with an installed S-POE card
Port LEDs on these modules indicate the status of the inline power delivered through the ports.
Table 12 describes the LED meanings for each port on the PoE-capable I/O modules.
Table 12: Port LEDs for the PoE-capable I/O Modules
LED Color and State Meaning
Port with
power enabled
Solid amber Link up
Amber blinking Activity
Slow amber blinking Port disabled
or
Link down
Blinking amber/green Power fault or insufficient power
Port with
power disabled
Solid green Link up
Slow green blinking Port disabled
Green blinking Activity
Off Link down
Blinking amber/green Power fault or insufficient power