Install guide

Using the Graphical User Interface (GUI) on AT-9900 Switches enable gui 1-19
Software Release 2.7.4
C613-10444-00 REV A
disable gui
Syntax DISable GUI
Description This command disables the web-based graphical user interface. If a GUI is
installed, it is enabled by default.
The GUI resource file that the router is currently set to use can be deleted when
the GUI is disabled. GUI resource files have an RSC extension. Use the show
install command and check the “Current Install” section to see which resource
file is currently set.
Related Commands enable gui
reset gui
show gui
enable gui
Syntax ENAble GUI
Description This command enables the web-based graphical user interface. If a GUI is
installed, it is enabled by default. Even when enabled, the GUI only works
when:
■ there is a valid resource file for the hardware model being used
■ the HTTP server is enabled
The GUI resource file that the router is currently set to use can be deleted when
the GUI is disabled. GUI resource files have an RSC extension. Use the show
install command and check the “Current Install” section to see which resource
file is currently set
Related Commands disable gui
reset gui
show gui