Install guide

Using the Graphical User Interface (GUI) on AT-9900 Switches 1-7
Software Release 2.7.4
C613-10444-00 REV A
9. At the login prompt, enter the user name and password.
The default username is manager:
User Name: manager
Password: friend
The System Status page is displayed (Figure 1-5 on page 1-11). Select
options from the sidebar menu to configure and manage the switch.
Option 2: Installing the Switch into the LAN
Use this procedure if:
■ You want to install the switch into the LAN before you configure it.
1. Select a PC to browse to the switch from.
You can browse to the switch from any PC that is running a supported
operating system with a supported browser installed, with JavaScript
enabled. See “Browser and PC Setup” on page 1-3 for more information.
You need to know the PC’s subnet.
2. Plug the switch into the LAN.
To install the switch into the same subnet as the PC:
Use an Ethernet cable to connect one of the switch ports to a device on the
LAN segment, for example, a hub, router or switch (see Figure 1-3).
Figure 1-3: Connecting the switch into the same LAN segment as the PC.
To install the switch into a different subnet than the PC:
Use an Ethernet cable to connect any one of the switch ports to a device on
the LAN segment in which you require the switch to work, for example, a
hub, router, or switch (see Figure 1-4).
hub or layer 2 switch PC
switch ports
your switch
AT-8724XL
Advanced Fast Ethernet Switch