Install guide

Software Version 2.7.4 43
Software Version 2.7.4
C613-10444-00 REV A
show ospf interface
Syntax SHow OSPF INTerface[=interface]
[AREa={BAckbone|area-number}] [IPaddress=ipadd]
[{FULl|SUMmary}]
Figure 22: Example output from the show ospf interface command for a specified
interface
vlan1:
Status ........................ Enabled
Area .......................... Backbone
IP address .................... 192.168.250.1
IP net mask ................... 255.255.255.0
IP network number ............. 192.168.250.0
Type .......................... broadcast
OSPF on demand ................ ON (OFF)
Passive ....................... No
State ......................... otherDR
Router priority ............... 5
Transit delay ................. 1 second
Retransmit interval ........... 5 seconds
Hello interval ................ 10 seconds
Router dead interval .......... 40 seconds
Poll interval ................. 120 seconds
Interface events .............. 1
Authentication ................ Password (area default)
Password ...................... Charlie1
Demand circuit ................ ON
Designated router ............. 192.168.250.254
Backup designated router ...... 192.168.250.253
Metric boost 1 ................ 0