Install guide

40 OSPF: Route Filtering with Route Maps Release Note
Software Version 2.7.4
C613-10444-00 REV A
ADD IP ROUTEMap=routemap ENTry=1..4294967295
[ACtion={INCLude|EXCLude}] MAtch PREFIXList=name
ADD IP ROUTEMap=routemap ENTry=1..4294967295
[ACtion={INCLude|EXCLude}] MAtch TAG=1..65535
Syntax for set clauses ADD IP ROUTEMap=routemap ENTry=1..4294967295
[ACtion={INCLude|EXCLude}] SET METRIC=0..4294967295
ADD IP ROUTEMap=routemap ENTry=1..4294967295
[ACtion={INCLude|EXCLude}] SET TYPE={1|2}
ADD IP ROUTEMap=routemap ENTry=1..4294967295
[ACtion={INCLude|EXCLude}] SET TAG=1..65535
The routesource and prefixlist parameters use a pre-configured prefix list.
Prefix lists are already used by BGP and are described in the Border Gateway
Protocol version 4 (BGP-4) chapter of your router or switch’s Software
Reference.
delete ip routemap
Syntax DELete IP ROUTEMap=routemap ENTry=1..4294967295
MAtch={ASPath|COMmunity|INTERFACE|MED|METRIC|NEXThop|
ORIGin|PREFIXList|ROUTESOURCE|ROUTETYPE|TAG}
DELete IP ROUTEMap=routemap ENTry=1..4294967295
SET={ASPath|BGPDampid|COMmunity|LOCalpref|MED|METric|
ORIGin|TAG|TYPE}
set ip routemap
Syntax for
match clauses
SET IP ROUTEMap=routemap ENTry=1..4294967295
[ACtion={INCLude|EXCLude}] MAtch
METRIC=0..4294967295[-0..4294967295]
SET IP ROUTEMap=routemap ENTry=1..4294967295
[ACtion={INCLude|EXCLude}] MAtch INTERFACE=interface
SET IP ROUTEMap=routemap ENTry=1..4294967295
[ACtion={INCLude|EXCLude}] MAtch
ROUTETYPE={INTRA|INTER|TYPE1|TYPE2|OTHER}
SET IP ROUTEMap=routemap ENTry=1..4294967295
[ACtion={INCLude|EXCLude}] MAtch ROUTESOURCE=name
SET IP ROUTEMap=routemap ENTry=1..4294967295
[ACtion={INCLude|EXCLude}] MAtch NEXThop=ipadd
SET IP ROUTEMap=routemap ENTry=1..4294967295
[ACtion={INCLude|EXCLude}] MAtch PREFIXList=name
SET IP ROUTEMap=routemap ENTry=1..4294967295
[ACtion={INCLude|EXCLude}] MAtch TAG=1..65535