Install guide

26 Summer Time Release Note
Software Version 2.7.4
C613-10444-00 REV A
set summertime
Syntax SET SUMMertime[=summertime-zone-name]
[STARTDAte=date]
[STARTMonth=month STARTWeek=week STARTDay=day]
[STARTTime=time]
[ENDDAte=date]
[ENDMonth=month ENDWeek=week ENDDay=day]
[ENDTime=time]
[Offset=offset]
where:
■ summertime-zone-name is a character string from 1 to 7 characters in length.
■ date is the date in d-mmm-yyyy, dd-mmm-yyyy, d-mmm-yy or dd-mm-yy
format. The day is one or two digits, the month is the first three letters of
the month (for example, apr), and the year is two or four digits.
■ month is the name of the month. The name is the first three letters of the
month (for example, apr).
■ week is a number between 1 and 5. 1 represents the first week of the month
and 5 represents the last week of month.
■ day is the first three letters of the name of a day of the week (for example,
mon, tue, wed).
■ time is the time in hh[:mm[:ss]] format, where hh=0-23, mm=0-59 and
ss=0-59. If hours are specified then minutes and seconds are optional. If
minutes are specified then seconds are optional.
■ offset is the number of minutes the time changes by, in the range 0 to 120.
Default values are:
summertime=dst
startmonth=apr startweek=1 startday=sun starttime=02:00
endmonth=oct endweek=5 endday=sun endtime=02:00
offset=60
show summertime
Syntax SHow SUMMertime
Figure 15: Example output from the show summertime command
Summertime configuration
--------------------------------------------------------------------------------
Enabled ........... No
Summertime name ... DST
Start ............. Sunday 02-Apr-2006 02:00am
End ............... Sunday 30-Oct-2005 02:00am
Offset ............ 60 minutes
Start rule ........ Recurring, First Sunday in April at 02:00am
End rule .......... Recurring, Last Sunday in October at 02:00am
--------------------------------------------------------------------------------