Install guide

Software Version 2.7.4 23
Software Version 2.7.4
C613-10444-00 REV A
set asyn
Syntax SET ASYn[=asyn-number]
[IDLEtimeout={10..4294967294|OFF|0}] [other-options...]
Timeout units are seconds. An asynchronous port with a value of off or zero
never times out. The default is off.
show asyn
Syntax SHow ASYn[=asyn-number|ALL]
Figure 13: Example output from the show asyn command
ASYN 2:0000070953 seconds Last change at:0000009023 seconds
ASYN information
Name ...................... Asyn 0
Status .................... enabled
Mode ...................... PPP
PPP Index ................. 1
TX ACCM ................... 00000000
Data rate ................. 38400
Parity .................... none
Data bits ................. 8
Stop bits ................. 1
Test mode ................. no
In flow state (mode) ...... on (Hardware)
Out flow state (mode) ..... off (Hardware)
Autobaud mode ............. disabled
Max tx queue length ....... 100
TX queue length ........... 0
Transmit frame ............ none
RX queue length ........... 0
IP address ................ none
Max transmission unit ..... 1500
IPX Network ............... none
Control signals
DTR (out) ............... on on 1
RTS (out) ............... on - 1
CD (in) ............... off connect 0
CTS (in) ............... off - 0
RNG (in) ............... off - 0
TTY information
Instance .................. 18
Login Name ................
Description ............... Asyn 2
Secure .................... yes
Connections to ............
Current connection ........ none
In flow state ............. on
Out flow state ............ on
Type ...................... VT100
Prompt .................... login
Echo ...................... yes
Attention ................. break
Manager ................... no
Edit mode ................. insert
History length ............ 20
Page size ................. 22
Idle Timeout (seconds)..... 300