Install guide

22 Inactivity Timeout Release Note
Software Version 2.7.4
C613-10444-00 REV A
Inactivity Timeout
This enhancement enables you to set inactivity timeout periods on:
■ telnet and other TTY connections, by using the command set tty
■ console connections over an ASYN port, by using the command set asyn.
When the idle timer expires for an ASYN connection, the user is logged out
and the connection displays the login prompt. When the idle timer expires for a
telnet connection, the user is logged out and the connection is terminated.
Modified Commands
set tty
Syntax SET TTy [IDLEtimeout={10..4294967294|OFF|0}]
[other-options...]
Timeout units are seconds. If the timeout value is off or zero, telnet sessions
never time out. The default is off.
show tty
Syntax SHow TTy[=tty-number|ALL]
Figure 11: Example output from the show tty command
Figure 12: Example output from the show tty=all summary command
TTY information
Instance .................. 30
Login name ................ manager
Description ............... Telnet 1
Secure .................... yes
Connections to ............ 21
Current connection ........ 0
In flow state ............. on
Out flow state ............ on
Attached module ........... Telnet
Attached module instance .. 1
Type ...................... VT100
Prompt .................... default
Echo ...................... yes
Attention ................. char
Manager ................... yes
Edit mode ................. insert
History length ............ 30
Page mode/length .......... 22
Idle Timeout (seconds)..... 300
TTY Description User name Module Inst Mgr Timeout
----------------------------------------------------------
016 Port 0 support TSER 000 yes off
018 Telnet 1 manager TELN 001 yes 300
----------------------------------------------------------