Install guide

Software Version 2.7.4 21
Software Version 2.7.4
C613-10444-00 REV A
Modified Command: Triggers
create trigger
Syntax CREATE TRIGger=trigger-id MODule=LLDP
EVENT={CDPAdd|CDPRemove}
[AFTer=hh:mm] [BEFore=hh:mm]
[{DAte=date|DAYs=day-list}] [NAMe=name]
[REPeat={Yes|No|ONCe|FORever|count}]
[SCript=filename...] [STAte={ENAbled|DIsabled}]
[TEST={YES|NO|ON|OFF|True|False}]
If you specify event=cdpadd, the trigger activates a script when the CDP
discovers a new device.
If you specify event=cdpremove, the trigger activates a script when the CDP
removes a device through the action of the holddown timer.
WAN Load Balancing
With the increasing use of the Internet to service core business functions comes
the need for reliable WAN connectivity. A specific aspect of this requirement is
for reliable connectivity to particular destinations. A simple and effective
method of achieving this is to provide alternative network connections via
different Internet Service Providers (ISPs).
WAN load balancing enables efficient use of multiple WAN connections. When
a router simultaneously connects to multiple WAN networks, the WAN load
balancer will try to distribute the router traffic equally across each network
interface.
For detailed information and commands, see the WAN Load Balancing chapter
of your router’s Software Reference for Software Release 2.7.3.