Install guide

Software Version 2.7.4 19
Software Version 2.7.4
C613-10444-00 REV A
show lldp cdp entry
Syntax SHow LLDP CDP ENTry=entryname [PROTocol] [VERsion]
This command displays information about a neighbour or neighbours.
The entry parameter specifies the name of the neighbour you want information
for. The string can be any format and can be terminated with a wild-card
character (*) to match more than one device. The wild-card character can be
entered on its own to match all neighbours.
Figure 6: Example output from the show lldp cdp entry command
show lldp cdp interface
Syntax SHow LLDP CDP INTerface[=interface]
Figure 7: Example output from the show lldp cdp interface command
CDP entry information
--------------------------------------------------------------------------------
Device ID ................. Switch
Protocol information:
IP address ................ 192.168.1.202
Platform .................... cisco WS-C3750G-24TS
Capabilities ................ Router,Switch,IGMP device
Interface ................... port20
Port ID (outgoing port) ..... GigabitEthernet1/0/10
Holdtime .................... 155s
Version:
Cisco Internetwork Operating System Software
IOS (tm) C3750 Software (C3750-I5-M), Version 12.2(20)SE, RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2004 by cisco Systems, Inc.
Compiled Wed 19-May-04 11:52 by yenanh
--------------------------------------------------------------------------------
CDP interface information
-------------------------
Name Status
-------------------------
port1 Down
port2 Up
port3 Down
port8 Up
port14 Down
port16 Up
-------------------------