Install guide

18 Link Discovery Protocol Release Note
Software Version 2.7.4
C613-10444-00 REV A
enable lldp cdp interface
Syntax ENAble LLDP CDP INTerface=interface
where interface is one of:
■ ethn
An Eth port, where n is the Eth port instance (for example, eth0)
■ portm
A switch port, where m is the port number (for example, port2 for the switch
port numbered 2).
reset lldp cdp counters
Syntax RESET LLDP CDP COUnters
reset lldp cdp table
Syntax RESET LLDP CDP TAble
show lldp cdp
Syntax SHow LLDP CDP
Figure 5: Example output from the show lldp cdp command
CDP general information
---------------------------------------------
Enabled ...................... Yes
Number of CDP neighbours ..... 14
SysUpTime .................... 12345.42s
CDP processing time .......... 3.385727s
Triggers:
CDP neighbour add .......... -
CDP neighbour remove ....... 5
---------------------------------------------