Install guide

Software Version 2.7.4 17
Software Version 2.7.4
C613-10444-00 REV A
Link Discovery Protocol
This enhancement enables the router or switch to receive and process Cisco®
Discovery Protocol packets. This enables management of certain Cisco devices.
The Cisco Discovery Protocol is a link layer protocol used by Cisco devices to
advertise their network layer addresses, device type and capabilities. Cisco
devices regularly sent out advertisements. With this enhancement, the router
or switch can read, check, and process these advertisements.
Parts of the Cisco CDP MIB (CISCO-CDP-MIB.mib) have also been
implemented. The router or switch can:
■ read all CDP MIB variables that relate to reception of CDP advertisements
■ write the variables cdpInterfaceEnable and cdpGlobalRun.
You can create triggers to activate scripts when the CDP discovers a new device
and when the CDP removes a device through the action of the holddown timer.
New Commands: CDP
disable lldp cdp
Syntax DISable LLDP CDP
disable lldp cdp debug
Syntax DISable LLDP CDP DEBug[={PACket|ADJacency|EVent}]
disable lldp cdp interface
Syntax DISable LLDP CDP INTerface=interface
enable lldp cdp
Syntax ENAble LLDP CDP
enable lldp cdp debug
Syntax ENAble LLDP CDP DEBug[={PACket|ADJacency|EVent}]