Install guide

12 VoIP Phone Calls and the Firewall Release Note
Software Version 2.7.4
C613-10444-00 REV A
disable firewall policy debug
Syntax DISable FIREwall POLIcy[=policy-name]
DEBug={ALL|ARP|HTTP|PACKET|PKT|PROCESS|PROXY|SMTP|
RADius|TCP|UPNP|ERRORcode|MESSage|PARSing|SIPAlg|TRAce}
Description of changes This command disables firewall debugging, including the new debugging
options for SIP ALG. Debugging is disabled by default.
show firewall
Syntax SHow FIREwall
Description of changes Output from this command now indicates whether the SIP ALG is enabled or
disabled.
Figure 2: Example output from the show firewall command
Firewall Configuration
Status .................... enabled
Enabled Notify Options .... manager
SIP ALG enabled ........... TRUE
Maximum Packet Fragments .. 20
Policy : voip
TCP Timeout (s) ................... 3600
UDP Timeout (s) ................... 1200
Other Timeout (s) ................. 1200
TCP Handshake Timeout Mode ........ Normal
SMTP Domain ....................... not set
TCP Setup Proxy ................... enabled
UPNP .............................. disabled
WAN interfaces .................. none
LAN interfaces .................. none
Maximum port maps ............... 250
SIP ALG ........................... enabled
Private Interface : eth1-1
Private Interface : eth1-2
Public Interface : eth0-0
Method .......................... dynamic