Install guide

1-18 delete wanlb healthcheck Release Note
Software Version 2.7.5
C613-10454-00 REV A
delete wanlb healthcheck
Syntax DELete WANLB HEALthcheck={1..3|ALL}
Description This command removes one or more healthcheck hosts from the WAN load
balancer. If all hosts are deleted, the WAN load balancer cannot use its
healthchecks to determine the status of its resources. In this situation, the
router will change the state of its WAN load balancer resources to be the same
as their associated IP interfaces.
Examples To delete the number 2 host use the command:
del wanlb heal=2
Related Commands add wanlb healthcheck
show wanlb healthcheck
Parameter Description
1..3 Selects a specific healthcheck host to delete.
ALL All the healthcheck hosts will be deleted.