Install guide

Software Version 2.7.5 67
Software Version 2.7.5
C613-10454-00 REV A
delete firewall policy udpporttimeout
Syntax DELete FIREwall POLIcy=policy-name UDPPorttimeout=port
where:
■ policy-name is a character string 1 to 15 characters long. Valid characters are
uppercase and lowercase letters, digits, and the underscore character.
■ port is a UDP port number or a list of comma-separated UDP port numbers
from 1 to 65535.
Description This command deletes a previously defined UDP port timeout from the
specified port. The UDP timeout defined with the set firewall policy command
is once again used for the port.
The udpporttimeout parameter specifies the port to delete the previously
defined UDP port timeout from.
Example To delete the UDP port timeout for port 5060 on the policy ‘zone 1’, use the
command:
del fire poli=zone1 udpp=5060
disable firewall policy
Syntax DISable FIREwall POLIcy=name [ACCcouting]
[FRAgment={ICMP|UDP|OTHER}[,...]]
[ICMP_Forwarding={ALL|PARAmeter|PING|SOURcequench|TIMEE
xceeded|TIMEStamp|UNREachable}]
[LOG={ALLOw|DENY|DENYDump|EVERYDeny|INAIcmp|INALlow|INA
Other|INATcp|INAUdp|INDDIcmp|INDDOther|INDDTcp|INDDUdp|
INDDump|INDEny|INDIcmp|INDOther|INDTcp|INDUdp|OUTAIcmp|
OUTAllow|OUTAOther|OUTATcp|OUTAUdp|OUTDDIcmp|OUTDDOther
|OUTDDTcp|OUTDDUdp|OUTDDump|OUTDEny|OUTDIcmp|OUTDOther|
OUTDTcp|OUTDUdp|SIPAlg}]
[OPtions={ALL|RECord_route|SECUrity|SOURcerouting|TIMES
tamp}] [PING]
where policy-name is a string 1 to 15 characters long. Valid characters are
uppercase and lowercase letters, digits, and the underscore character.
Description The new sipalg option on the log parameter stops the firewall from producing
log messages when SIP ALG operations and errors occur.