Install guide

Software Version 2.7.5 65
Software Version 2.7.5
C613-10454-00 REV A
UDP Port Timeout
Existing software versions allow you to configure a specific amount of time,
per firewall policy, for which the firewall maintains inactive UDP sessions. This
amount of time is called the UDP timeout, and is configured with the
udptimeout parameter in the set firewall policy command.
As well as this firewall UDP timeout, you can now configure a UDP port
timeout value per server port. For configured UDP ports only, the UDP port
timeout value overrides the general UDP timeout configured for the firewall.
A list of UDP ports can be specified for each firewall policy, and each port can
have a different UDP timeout value.
To add a UDP timeout to a specific UDP port or group of ports, use the
command:
add firewall policy udpporttimeout=port-number
To modify a UDP timeout for a specific UDP port or group of ports, use the
command:
set firewall policy udpporttimeout=port-number
To delete a UDP timeout from a specific UDP port or group of ports, use the
command:
delete firewall policy udpporttimeout=port-number
To view the UDP port timeout settings that are configured for a firewall policy,
use the command:
show firewall policy udpporttimeout
Command changes
The following table summarises the new commands (see Command Reference
Updates).
Command Change
add firewall policy udpporttimeout New command
delete firewall policy udpporttimeout New command
set firewall policy udpporttimeout New command
show firewall policy udpporttimeout New command