Install guide

64 Firewall Enhancements Release Note
Software Version 2.7.5
C613-10454-00 REV A
To see the logging settings, use the command:
show firewall policy[=policy-name]
Displaying Sessions Software Version 2.7.5 enables you to limit information displayed about
firewall sessions to only the sessions that are associated with a particular IP
address or range of addresses. To do this, use the command:
show firewall session[=session-number] ip=ipadd[-ipadd]
[other-options...]
Command Changes
The following table summarises the modified commands (see Command
Reference Updates).
Command Change
Debugging
enable firewall policy debug New sipalg option for debug parameter
New debugmode parameter
New ip parameter
disable firewall policy debug New sipalg option for debug parameter
New debugmode parameter
show firewall policy Existing Enabled Debug Options field
displays SIPALG when SIP ALG debugging is
enabled
New Enabled Debug Modes field
New Debug IP Address field
Logging
enable firewall policy New sipalg option for log parameter
disable firewall policy New sipalg option for log parameter
show firewall policy Existing Enabled Logging Options field
displays SIPALG when SIPALG logging is
enabled
Displaying Sessions
show firewall session New ip parameter