Install guide

Software Version 2.7.5 55
Software Version 2.7.5
C613-10454-00 REV A
show bgp
Syntax SHow BGP
Description The output of this command includes a new field.
Figure 13: Example output from the show bgp command
BGP router ID ................. 192.168.1.1
BGP Cluster ID ................ 192.168.1.1
Local autonomous system ....... 123
Confederation ID .............. 1234
Local preference .............. 100 (default)
Multi Exit Discriminator ...... -
Route table route map ......... -
Auto soft reconfiguration ..... Disabled
Default route origination ..... Disabled
Auto summary .................. Disabled
Number of peers
Defined ..................... 4
Established ................. 2
BGP route table
Iteration ................... 231
Number of routes ............ 12654
Route table memory .......... 431872
BGP route flap damping ........ Enabled
Table 16: New parameters in the output of the show bgp command
Parameter Meaning
Default route origination Whether BGP imports the default route (0.0.0.0/0) into its
routing table, when both of the following conditions occur:
• the default route is present in the router or switch’s RIB
• BGP is configured with an import or network entry that
includes the default route.
Auto summary Whether the router or switch automatically summarises locally
originated or imported subnet routes into a classful network
route; one of Enabled or Disabled.