Install guide

26 DHCP Option 82 Relay Release Note
Software Version 2.7.5
C613-10454-00 REV A
show bootp relay
Syntax SHow BOOTp RELAy
Description This command displays the current configuration of the BOOTP Relay Agent.
Figure 7: Example output from the show bootp relay command
BOOTP Relaying Agent Configuration.
Status ...................... Disabled
Maximum hops ................ 4
DHCP Option 82:
Insertion status .......... Enabled
Check ..................... Yes
Reforwarding policy ....... Replace
Debugging ................. Disabled
BOOTP Relay Destinations
------------------------------------------------------------
No relay destinations configured...
------------------------------------------------------------
BOOTP Counters
InPackets ............... 0 OutPackets ................ 0
InRejects ............... 0
InRequests .............. 0
InReplies ............... 0
Table 10: New parameters in the output of the show bootp relay command
Parameter Meaning
Insertion Status The status of DHCP Option 82 insertion, either Enabled or
Disabled.
Check Whether DHCP Option 82 information returned from the
DHCP server is being checked, either Yes or No.
Reforwarding policy The re-forwarding policy of client DHCP packets, either
Replace, Keep, or Drop.
Debugging The status of DHCP Option 82 debugging, either Enabled or
Disabled.