Install guide

2-78 show ip routemap Release Note
Software Version 2.7.5
C613-10454-00 REV A
show ip routemap
Syntax SHow IP ROUTEMap[=routemap] [OLDcommunityformat]
where routemap is a character string 0 to 15 characters long. Valid characters are
uppercase and lowercase letters, digits (0-9), and the underscore character
(“_”).
Description This command displays information about all IP route maps or a specific one
(Figure 2-7, Tab le 2-10 ).
The routemap parameter specifies the name of the route map to display. If one
is not specified, information about all route maps is displayed.
The oldcommunityformat parameter specifies that community numbers are
displayed in the old format. This is an integer calculated by:
AS number x 65536 + community value
Figure 2-7: Example output from the show ip routemap command
IP route maps
Map name
Entry Action
Clauses
------------------------------------------------------
bgp
1 Include
match Community 12 Exact=no
set LocalPref 3245
set Med 8726
set Origin incomplete
12345 Include
set Community 12 noadvertise Add=yes
4294967295 Include
set AS-path 44
set Local Pref 3245
set Med 8762
set Origin igp
------------------------------------------------------
ospf
1 Include
match Interface vlan2
set Metric 234
------------------------------------------------------