Install guide

2-72 set ip routemap Release Note
Software Version 2.7.5
C613-10454-00 REV A
Examples To change a route map entry number 10 so that it selects all routes with an
OSPF metric in the range 5 to 15, use the command:
set ip routem=metric_ent=10 ma met=5-15
To change the MED for an existing set MED clause in entry 10 of the route map
called set_med, use the command:
set ip routem=set_med ent=10 set med=234
Related Commands add ip routemap
delete ip routemap
show ip routemap