Install guide

2-68 set ip routemap Release Note
Software Version 2.7.5
C613-10454-00 REV A
METric The OSPF metric or a range of metric values. A route matches the
route map entry if its OSPF metric equals this value or is in this range.
Valid when filtering OSPF routes.
Default: no default
NEXThop The IP address of the next node in the path to the route’s destination,
specified in dotted decimal notation. For BGP, an update message
matches the route map entry if its next_hop attribute matches this
address.
Valid when filtering routes from any source.
Default: no default
ORIGin An origin attribute value, which indicates BGP’s source for the routes
at their originating AS. An update message matches the route map
entry if its origin attribute matches this value.
Valid when filtering BGP routes.
Default: no default
IGP The original source of the route was IGP.
EGP The original source of the route was EGP.
INCOmplete The original source of the route was neither IGP or EGP.
This includes statically-configured routes.
PREFIXList The name of a prefix list. A route matches the route map entry if the
prefix list contains that route. To create a list use the add ip prefixlist
command on page 2-44.
Valid when filtering routes from any source.
Default: no default
ROUTESource The name of a prefix list that lists one or more router IDs. A route
matches the route map entry if the prefix list contains the router ID of
the router that advertised the route to OSPF.
To create a prefix list use the add ip prefixlist command on
page 2-44. Note that the mask for a router ID must be
255.255.255.255, so the mask length must be 32.
Valid when filtering OSPF routes.
Default: no default
Parameter (cont.) Description (cont.)