Install guide

Filtering IP Routes add ip communitylist 2-43
Software Version 2.7.5
C613-10454-00 REV A
Examples To add an entry to community list 1 that matches communities attributes that
contain the communities NOEXPORT and 70000 and excludes them, use the
command:
add ip com=1 excl=noe 70000
Related Commands add ip routemap
delete ip communitylist
show ip communitylist
EXCLude A community name, community number, or comma-separated list of
names and numbers, which specifies the communities that this entry
excludes from this community list. When you use the community list
in a route map or filter, the map or filter does not carry out its specified
action on update messages with a matching community attribute
value.
Default: no default
INTernet The community of routes that can be
advertised to all BGP peers.
NOExport The community of routes that must not be
advertised outside a BGP confederation
boundary (a standalone autonomous system
that is not part of a confederation should be
considered a confederation itself).
NOAdvertise The community of routes that must not be
advertised to other BGP peers.
NOEXPORTSubconfed The community of routes that must not be
advertised to external BGP peers (this
includes peers in other members’
autonomous systems inside a BGP
confederation).
aa:xx The number of a community. aa and xx are
both integers in the range 0 to 65534. aa is
the AS number. xx is a value chosen by the
ASN administrator.
Parameter (cont.) Description (cont.)