Install guide

Filtering IP Routes 2-33
Software Version 2.7.5
C613-10454-00 REV A
Statically-Configured Routes
You can manually enter routing information into the router or switch, which
creates static routes. Dynamic routing protocols import these routes. For BGP
and OSPF, you can filter static routes when the protocol imports them, as
shown in the following figure.
ip-route-filter-stat1
Routing
Information
Base
(RIB)
route
BGP
OSPF
static
route
created
filtered by
route map
applied using
add bgp import
filtered by
route map
applied using
add ospf redistribute