Install guide

2-28 Release Note
Software Version 2.7.5
C613-10454-00 REV A
Filtering when using RIP to advertise routes
To filter routes before advertising them with RIP, create a filter or series of
filters, using the command:
add ip route filter[=filter-id] ip=ipadd mask=ipadd
action={include|exclude} protocol=rip direction=send
[other-options]
The router or switch automatically applies the filter when advertising routes to
RIP neighbours, because protocol=rip.
No mechanism for advertising static and interface routes
Statically-configured and interface routes do not have mechanisms to advertise
routes. Only the routing protocols (OSPF, BGP and RIP) advertise routes. To
advertise static and interface routes, with or without filtering, import the
routes into the required routing protocol.