Install guide

WAN Load Balancing show wanlb resource 1-39
Software Version 2.7.5
C613-10454-00 REV A
Figure 1-8: Example output from the show wanlb resource=all command
WAN Load Balancer Resource Configuration
---------------------------------------------------------
Resource....................ppp0
Status......................ENABLED
State.......................UP
Weight......................3000
Weight type ................Manual
Total Sessions .............34123
Current Sessions............24
Healthchecks
Avg overall response time ....40 ms
Resource up events .......... 1
Resource down events ........ 0
Unreachable host events ..... 1
Source IP address ........... None
Number Avg Response Host
------------------------------------------------------
1 Unreachable 202.36.8.9
2 20 ms www.vpn-site.com
3 60 ms www.critical-site.com
------------------------------------------------------
---------------------------------------------------------
Resource ...................... ppp1
Status ......................... ENABLED
State .......................... UP
Weight ......................... 3100
Weight type .................... Perfect Automatic
Total Sessions ................. 34123
Current Sessions................ 26
Adaptive Bandwidth Detection
Current throughput .......... 3150 kbps
Current maximum ............. 3950 bps
Healthchecks
Avg Response ................ 30 ms
Resource up events .......... 1
Resource down events ........ 0
Unreachable host events ..... 0
Source IP address ........... 172.204.1.8
Number Average Response Host
-------------------------------------------------------
1 20 ms 202.36.8.9
2 20 ms www.vpn-site.com
3 50 ms www.critical-site.com
-------------------------------------------------------