Install guide

1-38 show wanlb resource Release Note
Software Version 2.7.5
C613-10454-00 REV A
Table 1-5: Parameters in the summary output from the show wanlb resource command
Parameter Description
Resource The resource whose information is to be displayed.
Status The current status of the resource; one of ENABLED or DISABLED.
State The current state of the resource; one of UP, DOWN, or CLOSING. The state
of a resource will have the same state as its associated IP Interface. So if the
IP interface is UP, the resource state will also be UP. If the IP interface is
DOWN, then the resource state will also be DOWN. If the interface is in the
DISABLED state and there are still session active, then the resource state will
be in the CLOSING state.
Note that a resource whose healthcheck sites are all unreachable will move
to the DOWN state whereupon all user data will be redirected to alternative
ports. The resource will continue to issue its healthchecks and will return
the UP state when the required number of successchecks have been
received.