Install guide

1-34 show wanlb Release Note
Software Version 2.7.5
C613-10454-00 REV A
show wanlb
Syntax SHow WANLB
Description This command displays information about the general configuration and
status of the WAN load balancer (Figure 1-3, Ta ble 1-2 ).
Figure 1-3: Example output from the show wanlb command
Global WAN Load Balancer Configuration
----------------------------------------------------------
Status ...................... ENABLED
Select Method ............... ROUNDROBIN
Orphan Timeout .............. 3600s
Current Sessions ............ 1
Total Resources ............. 2
Debug ....................... ENABLED
Max WANLB Sessions .......... 34952
Healthchecks ............... ENABLED
Adaptive Bandwidth Detection (ABD)
Resolution ............... 1000 ms
Update Interval .......... 2 minutes
Decrease Threshold ....... 0 %
Traffic .................. TOTAL
----------------------------------------------------------
Table 1-2: Parameters in the output of the show wanlb command
Parameter Description
Status Whether the WAN load balancer is enabled or disabled.
Select Method The algorithm that the WAN load balancer is using when determining
which resource to select.
Orphan Timeout The length of time in seconds that a WAN load balancer session can
exist without having any data transmitted on it. After this period, the
session is declared an orphan and will close.
Current Sessions The total number on current sessions on all resources.
Total Resources The total number of resources configured on the WAN load balancer.
Debug Whether debugging for the WAN load balancer is enabled or
disabled.
Max WANLB
Sessions
The maximum number of WAN load balancer sessions that can be
created. This parameter is displayed when WAN load balancer is
enabled.
Healthchecks Indicates whether resource healthchecks are enabled or disabled.
Resolution The duration in milliseconds used to detect the resources’ weight
(bandwidth).
Update Interval The interval, in minutes, between updates to a resource’s maximum
weight (bandwidth) setting. This occurs only when the resource's
weighting method is PERFECTAUTOMATIC.