Install guide

WAN Load Balancing set wanlb abd 1-31
Software Version 2.7.5
C613-10454-00 REV A
Examples To change the resolution interval to 500 milliseconds use the command:
set wanlb abd res=500
Related Commands enable wanlb
show wanlb
TRAFfic The type of traffic that will be measured in the throughput
calculations. This parameter may be useful for disparities in price
or speed between the upstream and downstream ISP connections.
Default: total
INBound The throughput is calculated based on inbound
traffic only.
OUTBound The throughput is calculated based on outbound
traffic only.
TOTal The throughput is calculated based on both inbound
and outbound traffic.
Parameter Description