Install guide

1-28 reset wanlb resource counter Release Note
Software Version 2.7.5
C613-10454-00 REV A
reset wanlb resource counter
Syntax RESET WANLB RESource={interface|ALL} COUnter
Description This command resets the specified wan load balancer resource counters.
Examples To reset the counters of all of the resources currently configured on a router,
use the command:
reset wanlb res=all cou
Related Commands reset wanlb resource
show wanlb resource
Parameter Description
Interface The resource whose counters are to be reset. Interface is a valid
interface name formed by concatenating an interface type and an
interface instance. Valid interfaces are:
● eth (such as eth0, eth1)
● PPP (such as ppp0, ppp1)
To see a list of current valid interfaces, use the show interface
command.
ALL Resets the counters on all interfaces