Install guide

180 Enhancements to IPsec/VPN Release Note
Software Version 2.8.1
C613-10477-00 REV B
show ipsec policy counter
Syntax SHow IPSec POLIcy[=name] COUnter
Figure 57: Modified output for the show ipsec policy counter command.
.
.
.
Inbound Packet Processing Counters:
inDeny 0 inPermit 0
inCompUncompressed 0 inActionIpsecFail 0
inBundleStateBad 0 inNotFirstSaInBundle 0
inProcessStart 4373 inProcessFailImm 0
inProcessFail 0 inProcessDone 4373
inEndOfBundle 0 inPrematureEndBundle 0
inBundleSaMatchFail 0 inPolicyActionFail 0
inPolSelectMatchFail 0 inBundleReplaced 0
inBundleSoftExpire 0 inBundleExpire 0
inBadDecryptedPkt 0 inBadSpiResponse 0
Table 48: Modified parameters from the show ipsec policy counter command
Parameter Meaning
inBadSpiResponse The number of bad SPI requests generated. These occur
when an IPsec policy has the parameter respondbadspi set
to true and packets processed by that policy have an
unknown SPI value.