Install guide

150 Secure Copy (SCP) Release Note
Software Version 2.8.1
C613-10477-00 REV B
set loader
Syntax SET LOAder [ASYn={port|DEFault}]
[ATTribute={CErt|CRl|CAcert|DEFault}]
[BASeobject={dist-name|DEFault}]
[DElay={delay|DEFault}] [DESTFile=destfilename]
[DEStination={BOOTblock|CFLASH|FLash|NVs}]
[HTTPproxy={hostname|ipadd|DEFault}]
[METhod={HTTP|LDAP|SCP|TFtp|WEB|WWW|ZModem|NONE|
DEFault}] [{KEYid=key-id|PASSword=password|DEFault}]
[PROxyport={1..65535|DEFault}] [SRCFile|FIle=filename]
[SErver={hostname|ipadd|ipv6add|DEFault}]
[SERVPort={1..65535|DEFault}] [USERName=username]
Description This command sets defaults for the load and upload commands. All values
that can be specified with the load and upload commands can be specified as
defaults with the set loader command. Parameters not specified in the load or
upload commands use this default.
Parameter Description
METhod The method used to download the file. When scp is specified, Secure
Copy is the default method for loading and uploading.
Default: tftp
KEYid The ID number of a RSA private or public key that is held on the router
or switch. The server receiving the load request must have the public
key for this authentication to work. The key-id is a decimal number.
Default: no default
PASSword The password for server authentication, if RSA authentication is not
being used. This can be between 1 to 60 characters long. When you
type the password it appears as plain text on the screen, so it should
only be used in a secure area.
Default: no default