Install guide

148 Secure Copy (SCP) Release Note
Software Version 2.8.1
C613-10477-00 REV B
enable ssh debug
Syntax ENAble SSH DEBug={SSH|SCP|ALL}
Description This new command enables the SSH server debugging facility. If ssh is
specified, debugging is turned on for Secure Shell. If scp is specified,
debugging is turned on for Secure Copy. If all is specified, debugging for both
SSH and SCP is turned on. Debugging is disabled by default.
Example To enable debugging of SCP, use the command:
ena ssh deb=scp
enable ssh server
Syntax ENAble SSH SERver HOSTKey=key-id SERVERKey=key-id
[EXPirytime=0..168] [LOGintimeout=1..600]
[SCP={ENAbled|DISabled}]
Description This command enables the Secure Shell server. The new scp parameter allows
you to enable or disable Secure Copy service for the Secure Shell.
Parameter Description
SCP Whether the SSH server supports SCP connections.
Default: enabled
ENAbled Allows SCP connections
DISabled Does not allow SCP connections