Specifications

34 AT-8700XL Series
C613-03064-00 REV E
Figure 12: Example output from the SHOW INSTALL command.
Troubleshooting EPROM Installation
If the switch fails to reboot or functions incorrectly, then the most likely cause is
that there is a problem with the way the boot EPROMs were installed. Repeat
the installation procedure, checking:
• That the boot EPROMs are in the correct locations and oriented
correctly (using the relevant location diagram as a guide).
• For bent pins. These should be carefully straightened.
If the switch still fails to reboot, replace the new boot EPROMs with the
original set and contact your Authorised Allied Telesis distributor or reseller.
Contacting Us
With locations covering all of the established markets in North America, Latin
America, Europe, Asia, and the Pacific, Allied Telesis provides localized sales
and technical support worldwide. To find our representative nearest you, visit
Allied Telesis on the web at: www.alliedtelesis.com/.
Install Release Patch
------------------------------------------------------------
Temporary - -
Preferred flash:load\86s-210.rez -
Default EPROM (86s-2.1.0) -
------------------------------------------------------------
Current install
------------------------------------------------------------
Preferred flash:load\86s-210.rez -
------------------------------------------------------------
Install history
------------------------------------------------------------
No Temporary install selected
Preferred install selected
Preferred release successfully installed
------------------------------------------------------------