Install guide

Software Version 2.7.6 7
Software Version 2.7.6
C613-10462-00 REV A
Listing commands and valid parameters
You can now use either the Tab key or the ? key to find out which parameters
you can type next, as summarised in the following table
Figure 2: Listing all top-level command keywords with the question mark
Figure 3: Listing valid parameters with the Tab key
To... Press Tab or ? key after... Example
List all top-level command keywords with
a one-line description of each
The blank command prompt Figure 2
List all parameters that can complete the
command, with a one-line description of
some
A parameter and a space Figure 3
Manager >?
ACTivate Cause an action to be taken immediately
ADD Add new items to existing objects or instances
CLear Erase memory (NVS or FLASH) totally - use with extreme caution!
Connect Connect to a named Telnet or interactive host service or asyn port
COPy Copy a file in NVS or FLASH memory
CREate Make a new object or new instance of an object
DEACTivate Cause an action in progress to stop immediately
DELete Remove items from existing objects or instances
DESTroy Remove an object or an instance of an object
DISable Suspend the operation of an object but keep its configuration
Disconnect Terminate a session to a Telnet or interactive host service
DUMP Display the contents of a memory location for diagnostic purposes
EDit Invoke the built-in text editor to edit a file
ENAble Allow an object to enter its operational state
FINGer Send a finger query to the finger server on the specified host
FLUsh Force the queue of log messages to be processed and emptied
Help Display online help for the command line interface
LOAd Transfer a file from a remote server to FLASH or NVS memory
LOGIN Log on to the CLI and be authenticated as an authorised user
LOgoff Log out of the CLI, to prevent unauthorised access to the CLI
--More-- (<space> = next page, <CR> = one line, C = continuous, Q = quit)
Manager > add ospf range=192.168.1.0 <Tab>
AREa
EFFect
MASK
Manager > add ospf range=192.168.1.0