Install guide

52 Firewall Enhancements Release Note
Software Version 2.7.6
C613-10462-00 REV A
Command Change Summary
The following table summarises the modified commands (see Command
Reference Updates).
Command Change
add firewall policy nat New enapt option for nat parameter
add firewall policy rule New enapt option for nattype parameter
set firewall policy New icmpunreachabletimeout parameter
show firewall The ICMP unreachable timeout is displayed.
If a policy uses ENAPT, “enapt” is displayed in
the NAT field.
show firewall policy The ICMP unreachable timeout is displayed.
If a policy uses ENAPT, “enapt” is displayed in
the NAT field.