Install guide

38 Redistributing BGP Routes into RIP Release Note
Software Version 2.7.6
C613-10462-00 REV A
add ip routemap
Syntax for an
empty entry
ADD IP ROUTEMap=routemap ENTry=1..4294967295
[ACtion={INCLude|EXCLude}]
Syntax for a
match clause
ADD IP ROUTEMap=routemap ENTry=1..4294967295
[ACtion={INCLude|EXCLude}] MAtch ASPath=1..99
ADD IP ROUTEMap=routemap ENTry=1..4294967295
[ACtion={INCLude|EXCLude}] MAtch COMmunity=1..99
[EXAct={NO|YES}]
ADD IP ROUTEMap=routemap ENTry=1..4294967295
[ACtion=INCLude] MAtch MED=0..4294967295
ADD IP ROUTEMap=routemap ENTry=1..4294967295
[ACtion={INCLude|EXCLude}] MAtch NEXThop=ipadd
ADD IP ROUTEMap=routemap ENTry=1..4294967295
[ACtion={INCLude|EXCLude}] MAtch
ORIGin={EGP|IGP|INCOmplete}
ADD IP ROUTEMap=routemap ENTry=1..4294967295
[ACtion={INCLude|EXCLude}] MAtch
PREFIXList=prefixlist-name
ADD IP ROUTEMap=routemap ENTry=1..4294967295
[ACtion={INCLude|EXCLude}] MAtch TAG=1..65535
Syntax for a
set clause
ADD IP ROUTEMap=routemap ENTry=1..4294967295
[ACtion=INCLude] SET METric=0..4294967295
ADD IP ROUTEMap=routemap ENTry=1..4294967295
[ACtion={INCLude|EXCLude}] SET TAG=1..65535
Description No parameters or options have changed in Software Version 2.7.6. However,
note that:
■ only the above route map clauses are valid when redistributing BGP routes
into RIP
■ a set metric clause allows you to assign the same RIP metric to all imported
routes. Numbers above 16 are treated as 16
■ a set tag clause allows you to tag all imported routes. This means you can
identify the route’s original source, for example, in the output of the show
ip route command
For more information, see the Filtering IP Routes chapter of the Software
Reference.