Install guide

Software Version 2.7.6 37
Software Version 2.7.6
C613-10462-00 REV A
show ip rip redistribute
Syntax SHow IP RIP REDistribute
Description This command displays information about importing routes from BGP into RIP
(Figure 13, Tab le 6).
Figure 13: Example output from the show ip rip redistribute command
Examples To display the number of BGP routes that RIP has redistributed, use the
command:
sh ip rip red
RIP Route Redistribute
Protocol RouteMap Subnet Metric Redistribute/Limit
-----------------------------------------------------------
BGP bgp_to_rip Yes 10 68/100
-----------------------------------------------------------
Table 6: Parameters in output of the show ip rip redistribute command
Parameter Meaning
Protocol The routing protocol that the redistributed routes come
from: BGP.
RouteMap The name of the route map that selects routes for RIP to
import, and/or changes the route metric.
Subnet Whether RIP can import subnet routes; one of No (RIP only
imports classful network routes) or Yes (RIP imports classless
and classful network routes).
Metric The metric RIP gives the imported routes, or “-” if the metric
is not changed when redistributing. Note that a metric set
by the route map overrides this setting.
Redistribute The number of routes that RIP has redistributed.
Limit The maximum number of routes that RIP can redistribute.