Install guide

ManualsBrandsAllied Telesis ManualsSwitchAT 8648T/2SP

Software Version 2.7.6 15

Software Version 2.7.6

C613-10462-00 REV A

create classifier

Syntax:

non-IPv6 traffic

CREate CLASSifier=rule-id

[MACSaddr={macadd|ANY|DHCPSnooping}]

[MACDaddr={macadd|ANY}]

[MACType={L2Ucast|L2Mcast|L2Bcast|ANY}] [TPID=tpid|ANY]

[VLANPriority=0..7|ANY] [VLAN={vlanname|1..4094|ANY}]

[INNERTpid=tpid|ANY] [INNERVLANPriority=0..7|ANY]

[INNERVLANId=VLAN=1..4094|ANY]

[ETHFormat={802.2-Tagged|802.2-Untagged|ETHII-Tagged|

ETHII-Untagged|NETWARERAW-Tagged|Netwareraw-untagged|

SNAP-Tagged|SNAP-Untagged|ANY}]

[PROTocol={protocoltype|IP|IPX|ANY}]

[IPDScp={dscplist|ANY}] [IPTOs={0..7|ANY}]

[IPSAddr={ipaddmask|ANY|DHCPSnooping}]

[IPDAddr={ipaddmask|ANY}]

[IPPRotocol={TCP|UDP|ICMp|IGMp|ipprotocolnum|ANY}]

[IPXDAddr={ipxadd|ANY}]

[IPXDSocket={NCP|SAP|RIP|NNB|DIAg|NLSp|IPXwan|

ipxsocketnum|ANY}]

[IPXSSocket={NCP|SAP|RIP|NNB|DIAg|NLSp|IPXwan|

ipxsocketnum|ANY}]

[TCPSport={portid|port-range|ANY}]

[TCPDport={portid|port-range|ANY}]

[UDPSport={portid|port-range|ANY}]

[UDPDport={portid|port-range|ANY}]

[L4SMask=mask|ANY] [L4DMask=mask|ANY]

[L5BYTE01=byteoffset,bytevalue[,bytemask]]

[L5BYTE02=byteoffset,bytevalue[,bytemask]]

[L5BYTE03=byteoffset,bytevalue[,bytemask]]

[L5BYTE04=byteoffset,bytevalue[,bytemask]]

[L5BYTE05=byteoffset,bytevalue[,bytemask]]

[L5BYTE06=byteoffset,bytevalue[,bytemask]]

[L5BYTE07=byteoffset,bytevalue[,bytemask]]

[L5BYTE08=byteoffset,bytevalue[,bytemask]]

[L5BYTE09=byteoffset,bytevalue[,bytemask]]

[L5BYTE10=byteoffset,bytevalue[,bytemask]]

[L5BYTE11=byteoffset,bytevalue[,bytemask]]

[L5BYTE12=byteoffset,bytevalue[,bytemask]]

[L5BYTE13=byteoffset,bytevalue[,bytemask]]

[L5BYTE14=byteoffset,bytevalue[,bytemask]]

[L5BYTE15=byteoffset,bytevalue[,bytemask]]

[L5BYTE16=byteoffset,bytevalue[,bytemask]]

Description The new dhcpsnooping option for the macsaddress and ipsaddress

parameters applies the classifier to entries in the DHCP snooping binding

database.

The macsaddress parameter specifies the source MAC address of the packets.

The ipsaddress parameter specifies the source IP address of the packets.