Specifications

Features in 291-11 60
Version 291-19
C613-10488-00 REV R
Level 3
CR00019713 OSPF 2 If two or more ECMP routes from Type-5 LSAs were learned by the router
or switch, only the route from the LSA with the highest Router ID would be
inserted into the IP route table.
This issue has been resolved. All routes will now be inserted.
YYYYYYYYYYY
CR Module Level Description
AR400 AR7x5 AR7x0S Rapier i Rapier w AT-8800 AT-8600 AT-8700XL x900-48 AT- 9900 AT-9800
CR00007089 PRI 3 The following issues occurred with testing PRI interfaces:
■ When the commands enable pri=x test=y and disable pri=x test=y
were entered, the router or switch did not display an “Operation
Successful” message.
This issue has been resolved.
■ The output displayed by the “?” help for enable pri=x test=?
incorrectly said that the maximum value was 11.
This issue has been resolved. The “?” help now returns the following
message:
required - decimal in the range 1 to 7 (for E1)
1 to 9 (for T1)
■ When show pri=x test was entered, the router or switch displayed an
error message instead of the table of test switches.
This issue has been resolved.
■ When disable pri=x test was entered with no value on the test
parameter, the router or switch displayed an error message instead of
disabling all current tests.
This issue has been resolved.
YYYYY––––––
CR Module Level Description
AR400 AR7x5 AR7x0S Rapier i Rapier w AT-8800 AT-8600 AT-8700XL x900-48 AT- 9900 AT-9800