Specifications

Features in 291-19 6
Version 291-19
C613-10488-00 REV R
CR00025177 OSPF 2 Previously, when multihomed links were used between OSPF neighbours
and all were active (that is, the secondary links were not added with
passive=on), then it was possible that the show opsf neighbour
command would not display some neighbours. This issue has been
resolved.
YYYYYYYYYYY
CR00025186 PPP 2 If a router or switch was configured for both PPPoE client and Access
Concentrator modes, then after a restart when the router or switch
received a PPP LC Echo Request for a session that no longer existed (due to
the restart) it would send an invalid PADT for that session. As a result the
session would take much longer to be removed by the peer and a new
session would not be established as quickly as possible.
This issue has been resolved. After a restart, the router or switch will ensure
that a valid PADT is sent and re-establishment of the PPPoE session happens
as quickly as possible.
YYYYYY––Y–Y
CR Module Level Description
AR44x / AR450 AR7x5 AR750S / AR770S Rapier i Rapier w AT-8800 AT-8600 AT-8700XL AT-8948 / x900-48 AT-9900 AT-9800