Specifications

Features in 291-16 24
Version 291-19
C613-10488-00 REV R
CR00022153 DHCP 2 Previously, on a router or switch using multihoming, the DHCP server on the
router or switch could sometimes assign multiple IP address to the same
client. This occurred when a client's DHCP Discover message was received
through more than one logical interface on the router or switch.
This issue has been resolved.
YYYYYYYYYYY
CR00022292 Switching 2 On some occasions, inserting an Allied Telesis AT-G8T copper GBIC stopped
the GBIC ports from operating correctly. The GBIC LEDs would also display
the wrong state (lit when the GBIC was removed or off when the GBIC was
inserted).
This issue has been resolved.
–––––Y––––Y
CR00022437 IPsec,
LT2P
2 Previously some specific network configurations would not work when
L2TP was secured with IPsec transport mode through NAT. This issue has
been resolved.
YYYYYY–––––
CR00022482 LLDP 2 Previously a downstream device could learn the router or switch’s MAC
address when it received an LLDP DU.
This issue has been resolved.
YYYYYYYYYYY
CR00022545 L2TP 2 Previously, when a router or switch at one end of an L2TP tunnel rebooted,
it would have to wait for the tunnel on the other end to timeout before it
could recreate the tunnel. This caused a delay in recreating the tunnels after
a restart. This issue has been resolved.
Also, under some situations, when an L2TP tunnel was destroyed the router
or switch would crash. This issue has been resolved.
YYYYYY––YYY
CR Module Level Description
AR44x / AR450 AR7x5 AR750S / AR770S Rapier i Rapier w AT-8800 AT-8600 AT-8700XL AT-8948 / x900-48 AT-9900 AT-9800