Specifications

Features in 291-17 16
Version 291-19
C613-10488-00 REV R
CR00020833 IP 3 When using IP NAT, TCP connections would have the sequence and/or
acknowledgement numbers incorrectly altered by the router, which
prevented the TCP connections from being properly set up.
This issue has been fixed. Please note that NAT configured using the
Firewall was unaffected by this issue.
YYY––––––––
CR00021128 Firewall,
VRRP
3 Previously, when VRRP was configured on a router or switch that also had
a Firewall NAT rule involving the same VRRP IP address, when the router or
switch was in the Backup VRRP state it would reply to any incoming ARPs
for the VRRP IP address with its own MAC address.
This issue has been resolved. When VRRP is in the backup state, it will never
reply to ARP requests for the VRRP IP address under any circumstances.
YYYYYY––––Y
CR00023040 GUI,
Firewall
3 When configuring LAN to WAN Firewall rules via the GUI, the “Action”
drop-down box was missing the “No NAT" option.
This issue has been resolved.
YYYY–Y––––Y
CR00023083 IPsec 3 Previously, if the router or switch had IPsec policies create on multiple
interfaces, it would sometimes fail to create a connection when it received
a connection request from a valid peer. This was because the router or
switch would sometimes use the wrong IPsec policy for the interface.
This issue has been resolved.
YYYYYY–––––
CR Module Level Description
AR44x / AR450 AR7x5 AR750S / AR770S Rapier i Rapier w AT-8800 AT-8600 AT-8700XL AT-8948 / x900-48 AT-9900 AT-9800